Armor Plate Floor Sealer Finish 20lt

Stock Code:
CHE-ARMOR-20
Price:
$276.32 GST inc

Description

Armor Plate Floor Sealer Finish is a highly advanced floor finish with superior “off-the-mop” initial gloss. This ultra-high solids formula provides exceptional film clarity, repels soil and scratches, and extends the time between stripping cycles from 18 to 36 months.

FEATURES & BENEFITS

  • Easy to apply & dries quickly: Levels beautifully, no re-coat attack.
  • Highest “Off-The-Mop” gloss: Floors look beautiful right from the start.
  • Ultra-High Solids: Save time and labour with fewer coats.
  • Scuff, scratch and abrasion resistant: Minimizes maintenance requirements.
  • Excellent Burnish Response: Easily maintain wet-look gloss for extended period of time.
  • Repels Dirt: Stays clean, clear and bright longer.
  • Exclusive Micro Molecular Technology: Superior durability, extremely consistent surface excel at long term performance.

APPLICATIONS

Floor Preparation:

  1. Using Superior Stripper, No-Rinse, No-Scrub Liquifying Stripper: Strip off old finish, paying particular attention to areas under furniture, and build-up areas.
  2. Remove all stripping solutions from floor with mop or wet dry vacuum.
  3. If necessary, rinse thoroughly with clean water and allow to completely dry.

Application:

  1. Using a clean mop or applicator apply thin uniform coats of Armor Plate Floor Sealer Finish.
  2. Allow to dry for a minimum of 30 minutes after each coat.
  3. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.

Buffing and Burnishing:

  1. Armor Plate Floor Sealer Finish is ideal for use in no-buff or buffing programs using all speeds of buffing or burnishing machines.
  2. For spray buffing, mop-on or auto-scrubber restoring use Armor Plate Gloss Restorer.

Routine Maintenance:

  1. Damp mop or clean with an automatic scrubber using Armor Plate Neutral Floor Cleaner following label directions.

Scrub and Re-coat:

  1. When routine maintenance and buffing/burnishing no longer responds as needed, scrub and re-coat using Armor Plate Deep Scrub and Re-coating Cleaner following label directions.

SDS - Click hear